Experts in Voice and Data Cabling Active Communication Company Ltd

Wireless Radio Frequency (rf) Links

wireless rf links

The 1GB point-to-point System

wireless rf links

There is a Gigabit point-to-point link, especially designed according to FCC and ETSI requirements. They provide interconnection between remote LAN segments at ultra high speed and utilises Gigabit Ethernet protocols. One full duplex Gigabit link provides 1.25 Gigabit-per-second (Gbps) connectivity that is the equivalent of approximately 650 T1 lines or 1000 DSL connections.

 

 

14MB to 300MB Units

Because we find the best possible solution for your business, our products may vary. This is a typical example of a non line of site RF unit, The speed varies from 14MB to 300MB depending on model.

  • Available in multiple frequency bands including 2.4, 5.4 and 5.8GHz
  • High capacity and spectrum efficiency – up to 300Mbps,
  • Long-range backhauls reaching distances of more than 60 km
  • 5/10/20/40 MHz selectable channel size for reduced interference
wireless rf links

Using lower frequency bands, RF units are capable of communicating to each other in the most adverse conditions. A typical solution for non line of sight units are when there is 1 or more buildings between 2 sites. The units will bounce the information round the buildings until a link can be made.

Our free site survey will determine the estimated throughput and link distance via GPS devices.

 

 

So all you have to do now is contact us and you can do this in a number of ways;

request call back

ACCL experts in wireless rf links